SG Eddy Current Separator
Non-ferrous metals, iron and other materials can be sorted at the same time. It has strong applicability and It is widely used in bottle recycling field.
If you have any question or need drawings or solutions, Please leave us a message.
SGECS is one of the unique design of automatic sorting system especially for cans recycling.
It is the device for PET bottles, aluminum cans and iron cans separation at the same timeautomatically.
Eddy current separators have a conveyor belt system with a high-speed magnetic rotor at the end. The rotation speed of the magnets generates an induction field, creating a rapidly changing magnetic field. The separation is based on the principle that every electrically conductive particle located in an alternating magnetic field is temporarily magnetized.
Eccentric rotors differ in that the magnet system is of a smaller diameter and is located in an eccentric position to the outer rotor drum. The magnet system is positioned close to the surface where the conveyed feed material is leaving the rotor due to its natural trajectory. This design gives an efficient separation but leaves a ‘dead’ magnetic area at the bottom of the rotor so that any attracted ferrous falls away extending conveyor belt life
The pole system is adjustable, so that the application of force can be optimally adjusted for maximum ejection efficiency. As compared to concentric pole systems, the eccentric pole system increases the metal yield by 50%. The service life of the belt and drum shell is considerably lengthened.
The eccentric magnet rotor can be adjusted in various angles compared to the external casing. This influences the moment of discharge of the non-ferrous metals. Since the magnet rotor is placed eccentrically in respect of the external casing, the iron particles cannot become attached to the external casing where they would cause burn-in problems.
Designed with top grade rare-earth magnet materia.
98% recovery of aluminum cans from commingled recyclables.
Permanent rare-earth magnetic technology offers high-strength and long life.
Reasonable structure, convenient installation, easy operation and maintenance.
separate three materials in one run without drum magnet.
100% separation rate.
Working widths: 400/650/800/1000/1200/1500mm
Specific requirements for non-standard applications can naturally always be discussed.
|Column 1||Column 2||Column 3||Column 4||Column 5||Column 6|
|Column 1 Value||Column 2 Value||Column 3 Value||Column 4 Value||Column 5 Value||Column 6 Value|
|Column 1 Value 2||Column 2 Value 2||Column 3 Value 2||Column 4 Value 2||Column 5 Value 2||Column 6 Value 2|
|Column 1 Value 3||Column 2 Value 3||Column 3 Value 3||Column 4 Value 3||Column 5 Value 3||Column 6 Value 3|