Eccentric Pole Eddy Current Separator

The eccentric pole eddy current separator is much suitable for complicated recycling condition, it can effectively avoid the damage caused by long-term build up of ferrous materials.

If you have any question or need drawings or solutions, Please leave us a message.

Contact Now

Description:

Eddy current separators are widely used to separate non-ferrous metals (aluminum, copper, brass, etc.) from all kinds of downstream bulk material.

The eddy current separator is applied to a conveyor belt carrying a thin layer of mixed waste. At the end of the conveyor belt is an eddy current rotor. Non-ferrous metals are thrown forward from the belt into the bulk, while the raw materials simply fall off the belt.

Principle:

Eddy current separators have a conveyor belt system with a high-speed magnetic rotor at the end. The rotation speed of the magnets generates an induction field, creating a rapidly changing magnetic field. The separation is based on the principle that every electrically conductive particle located in an alternating magnetic field is temporarily magnetized.

Drum Magnet:

For successful non-ferrous separation, a drum magnet should be installed prior to an Eddy Current Separator. Thus it could protect the eddy current separator from causing damage to the belt by ferrous metal.

Vibration feeder provides stable feeding volume and increases separation efficiency.

Features of the our ECS:

Equipment Performance Advantages

  • Ultra High-Strength and Frequency Magnetic Rotor
  • Large Number Poles Rare Earth Eccentric Rotor for fine size fractions
  • Higher RPMs

Equipment Safety Introduction

  • Over-temperature alarm (with bearing temperature monitoring, over-temperature alarm function)
  • Stainless steel outer barrel (rotor wrapped with stainless steel protection barrel outside to prevent the magnetic block from falling off)
  • Low noise (the noise is less than 75 decibels )
  • Safety design for vibration feeder

Equipment operation and maintenance

  • Rotor position could be adjusted for optimum separation
  • Simple splitter adjustment for easy operation and optimum separation result
  • Unique frame design for quick belt change
  • Unique guard design for easy maintenance

Appearance design

  • Streamline design
  • Electrostatic spraying technology
  • Custom Color Services

Capacity the ECS could deal with for Different Materials

Model

PET Flakes
(Al≤5%)

PET Bottles

ASR
Fluff

Glass Cullet

Zorba

Incineration
Bottom
Ash

Municipal Solid Waste

ECS65P

950

1500

1000

8000

4500

700

1500

ECS80P

1280

2000

1500

10000

6000

2000

1800

ECS100P

1600

2500

1800

14000

8000

3500

2500

ECS120P

2100

3000

2000

16000

10000

5000

3100

ECS140P

2500

3500

2500

20000

12000

6500

3700

ECS160P

3000

4000

3000

23000

14000

8500

4500

ECS180P

3200

4500

3200

25000

15000

10000

5000

ECS200P

3400

4800

3500

30000

16000

16000

5500

ECS220P

3600

5000

3700

33000

17000

20000

6200

aluminum profiles recyclingpet flakes Plastic recyclingmetal scrap recyclingincineratuion bottom ash
glass recyclinge scrap recyclingconstruction demolitionnonferrous metal sorting recycling aluminium sorting pvc recycling

Find out more about our service areas     CONTACT  US 

Model

Belt Width

Motor Power

Dimension(mm)

Weight
 

mm

kw

Length

Width

High

Kg

WL-40P

450

3.0/0.75

2080

1357

1100

1100

WL-65P

650

4.0/1.5

3300

1500

1200

1200

WL-80P

800

5.5/1.5

3300

1700

1200

1400

WL-100P

1000

5.5/1.5

3300

1900

1200

1600

WL-120P

1200

5.5/2.2

3300

2000

1200

1800

WL-140P

1400

7.5/2.2

3620

2130

1587

2100

WL-150P

1500

7.5/2.2

3420

2240

1530

2200

WL-180P

1800

7.5/2.2

3300

2700

1200

2800

    Get In Touch Now!

    For further technical assistance, expert advice and more information for quote, please do not hesitate to contact us.

      Recommend Products